MENU

i-tec MySafe USB 3.0 / USB-C 3.1 Gen. 2, External case for 2x SATA M.2 drive, RAID 0/1/JBOD Support

i-tec MySafe USB-C/USB-A 2x M.2 SATA Drive presents an external frame for installation of maximum two M.2 B-Key SATA Based SSD disks; you can connect this frame to your PC, notebook, or tablet by means of USB-C, or USB 3.0 interface (the connecting cables USB-C – USB-C as well as USB-C – USB 3.0 included). The USB connections USB offers very fast and easy data transfer – up to 10 Gbps via USB-C, and up to 5 Gbps via USB 3.0. The USB-C interface is compatible with Thunderbolt 3. Rigid aluminium design provides an excellent heat removal as well as perfect protection for the M.2 disks.

One of the greatest advantages of this frame is the support of RAID, which will allow either to set high level of your data protection, or the very high data writing speed, eventually to create huge hard disk unit (consisting of two hard disks. The following RAID possibilities (if two hard disks are used) are available:

  • RAID 0: very high data writing speed (the frame is able to perform interlaced writing to both hard disks).
  • RAID 1: high data protection level (the frame perform mirroring (it writes the identical data to both hard disks; in case of failure of one of the hard disk, neither the data nor the access to the data will be lost).
  • JBOD/Standalone: within the system, the frame is seen as two standalone ones.
  • JBOD/Spanning: within the system, the frame is seen as only one hard disk (with the capacity equal sum of capacities of both hard disks).

M.2 installation is very simple, it takes you just few minutes.

In case of problems with the installation, technical difficulties or incorrect function of the equipment, check first for the possible solution in the FAQ tab.

Long product description: i-tec MySafe USB 3.0 / USB-C 3.1 Gen. 2, External case for 2x SATA M.2 drive, RAID 0/1/JBOD Support, USB-C 3.1 Gen. 2 interface, Data transfer rate up to 10 Gbps (USB-C) or 5Gbps (USB 3.0), Aluminium housing, Thunderbolt 3 compatible

PN
EU: CAMYSAFEDUALM2
EAN
EU: 8595611702440
USB-CUSB-3.0Thunderbolt-3
  • An external USB-C frame, suitable for all M.2 B-Key SATA Based SSD hard disks
  • Rigid aluminium design provides an excellent heat removal as well as perfect protection for the hard disk.
  • Connectivity USB-C 3.1 Gen. 2, USB 3.0 compatible (cables USB-C - USB-C as well as USB-C - USB 3.0 included).
  • Transfer rate up to 10 Gbps (USB-C 3.1 Gen.2), or 5 Gbps (USB 3.0).
  • Plug & Play.
Detailed specification

Where to Buy

Online Resellers

Distributors
Distributors
  • Specifications
  • Manuals, drivers
  • FAQ

Specifications

  • An external USB-C frame, suitable for all M.2 B-Key SATA Based SSD hard disks
  • Rigid aluminium design provides an excellent heat removal as well as perfect protection for the hard disk.
  • Connectivity USB-C 3.1 Gen. 2, USB 3.0 compatible (cables USB-C – USB-C as well as USB-C – USB 3.0 included).
  • Transfer rate up to 10 Gbps (USB-C 3.1 Gen.2), or 5 Gbps (USB 3.0).
  • Plug & Play.
  • Easy and safe selection of the RAID level.
  • RAID levels 0, 1, JBOD (Standalone, Spanning)
  • Simple and easy operation by means of pushbutton (located on the rear panel).
  • Active LED indicates the power supply status as well as the HDD status.
  • When the connection via USB 3.0 (or less powerful USB-C), the power supply of the M.2 disks sometimes may become insufficient. In such case is recommended to use the AC adaptor 5 Volts (not included).
  • OS – Windows 7/8/8.1/10, Mac OS 10.x and higher, Linux, Android, Chrome
  • Product size 125 x 78 x 20 mm
  • Product weight 165 g
  • Package size 168 x 110 x 50 mm
  • Package weight 295 g

 

System requirements

Hardware requirements: PC or notebook with one available USB-C or USB 3.0 port

Operating system: Windows 7/8/8.1/10, Mac OS 10.x and higher, Linux, Android, Chrome

 

Package contents

  • External Enclosure for 2x M.2 B-Key SATA Based SSD Disks
  • USB-C 3.1 cable (45 cm)
  • USB-C 3.1 to USB 3.0 cable (45 cm)
  • Set of screws for mounting
  • Screwdriver
  • User’s Guide

Package contents

  • External Enclosure for 2x M.2 B-Key SATA Based SSD Disks
  • USB-C 3.1 cable (45 cm)
  • USB-C 3.1 to USB 3.0 cable (45 cm)
  • Set of screws for mounting
  • Screwdriver
  • User’s Guide

FAQ

Question: The frame is not detected by the operating system.

Answer: Try connecting the device to another USB/Thunderbolt port (according to the frame type)

 

Question: The HDD is not visible in the system.
Answer: Make sure the HDD is formatted. Especially for a brand-new drive. You will find this information in the disk manager located in the device manager. You can also format the HDD here. 

Notice! The formatting function always deletes the data. Therefore, back up your data before starting the drive formatting.

 

Question: I can’t insert (use) the M.2 drive into this frame.

Answer: This frame is for the SATA M.2 drives only.

hp-spoluprace-bg.png (193 798 bytes)
Come and join us
Are you an IT reseller looking to expand your product portfolio? Our Partner Program provides excellent benefits